Carefully! Electrostatic discharge can cause airbags to deploy. Therefore, before disconnecting the activation and ground wires, you must remove the electrostatic charge from yourself. To do this, for example, touch the body or the door lock.
Disconnect wiring harness, disconnect connector -1-. Remove screw -2-. Remove inertia coil -3-.
Installation
Installation in reverse order. When removing parts of the seat belts as part of an accident repair, be sure to replace their screws.
Note: Check that the connector is well connected and clicks into place audibly.
Carefully! Connect the battery with the ignition on. Unqualified repair of pyrotechnic units (airbags, seat belt pretensioners, etc.) may cause them to operate after the battery is connected. When connecting the battery, no one should be in the passenger compartment.