Parts and assemblies of the front three-point seat belt
1. Screw: Replace the screw after an accident with the seat belt fastened; 40 Nm
2. Safety belt hook
3. Screws: 4.5 Nm
4. Front belt guide: Observe installation position when installing.
5. Screw: Replace the screw after an accident with the seat belt fastened; 40 Nm
6. Guide eyelet: After tightening the screw, free movement must be maintained.
7. Screw: Replace the screw after an accident with the seat belt fastened; 20 Nm
8. Seat belt height adjuster: always replace after pretensioner activation
9. Inertia coil: Driver's side: with driver belt pretensioner igniter 1 and left front pretensioner control unit. Passenger's side: with igniter 1 for the front passenger's belt tensioner and control unit for the front right pretensioner. With seatbelt pretensioner Pre-Crash Basic (PC B).
10. Screw; Replace the screw after the accident with the seat belt fastened; 40 Nm
Details and assemblies of the rearmost three-point seat belt with pretensioner
1. Inertial coil
2. Wiring harness
3. Screw: Replace the screw after an accident with the seat belt fastened; 40 Nm
4. Screw: Replace the screw after an accident with the seat belt fastened; 40 Nm
5. Earring of the extreme rear seat belt
Parts and assemblies of the middle rear three-point seat belt
1. Seat belt buckle: With rear seat belt buckle switch on passenger side -E259-. Always replace after activating the pretensioner. When tightening the nut, it must be pressed against the stop.
2. Nut: Tightening torque: 40 Nm
3. Nut: Replace the nut after an accident with the seat belt fastened. Tightening torque: 40 Nm
4. Inertial coil
5. Middle rear belt guide: If damaged, replace the entire guide. To remove, press the 2 latches inward and remove the guide. To install, press until audible fixation.
6. Right rear seat back
7. Earring of a belt of an average back seat
Details and knots of the lock of a forward seat belt
1. Front seat belt buckle
2. Front seat: Driver's side: with switch; on the passenger side with the front passenger seat belt buckle switch. Always replace after activating the pretensioner.
3. Screw: Replace the screw after an accident with a seat belt; 40 Nm
Details and knots of the lock of a back seat belt
1. Left double lock: With switch. Always replace after activating the pretensioner. When installing the seat belt buckle, press against the stop. Should be pressed all the way.
2. Middle seat belt buckle: With switch. Always replace after activating the pretensioner. When installing the seat belt buckle, press against the stop. Should be pressed all the way.
3. Right lock with an earring of the middle rear seat belt; With rear seat belt buckle switch on passenger side. Always replace after activating the pretensioner. When tightening the nut, it must be pressed against the stop.
4. Nut: Replace after an accident with the seat belt fastened; 40 Nm
5. Connector: switch
6. Nut: Replace after an accident with the seat belt fastened; 40 Nm
7. Connector: switch and switch