Side direction indicators
Switch off the ignition and all electrical consumers. Remove mirror element. Press catches -arrows A- and remove top cover -1- -arrow B-.
Remove screws -arrows A-. Press catches -arrow B- and remove cover -1-.
Remove bulb holder -1-.
Press catches -arrow A- and lower cover -1- slightly. Unclip bottom cover -1- by pulling it out of retainers -arrow B-. Disconnect connector.
Press lock -arrow- and remove side turn signal -1- from bottom cover -2-.
Installation
Installation in reverse order. Perform a functional test of all functions.
Landing Area Light - Removing the Lamp and Landing Area Light Housing
Switch off the ignition and all electrical consumers. Remove mirror element. Press catches -arrows A- and remove top cover -1- -arrow B-. Remove screws -arrows A-. Press catches -arrow B- and remove cover -1-. Remove bulb holder -1-. If necessary, replace the defective incandescent lamp (W5W). Press catches -arrow A- and lower cover -1- slightly. Unclip bottom cover -1- by pulling it out of retainers -arrow B-. Disconnect plug, unscrew screw -arrow- (0.5 Nm) and remove the backlight housing -1-.
Installation in reverse order.