Left headlight
Carefully break off plugs -2-. Unscrew the fastening screws located under the plugs.
Note: The screws are not exactly under the plugs. Therefore, the control motor -1- must be turned slightly -arrow-.
Right headlight
Carefully break off plugs -3-. Remove screw under plug and screw -2-.
Note: The screw is not exactly under the plug, so the control motor -1- must be turned slightly -arrow-. Remove screw -2- according to circumstances. You may need a Torx screwdriver one size smaller.
Both headlights
Slide control motor -1- -arrow A- out of groove and remove pressure piece -arrow B-.
Installation
Installation in reverse order. Replace the broken plugs -2- with new ones. After installing the actuator motor, check the correct operation of it.