Removing
1. In the engine compartment, open the throttle, and release the tip of the cable from the sector, then separate the cable cover from the mounting / adjustment bracket (see illustrations).
2. While working in the cabin, release the cable housing from the fork at the top of the pedal.
3. Get a cable in a motor compartment and remove it.
Installation
4. Install in the reverse order of removal; adjust the cable as follows.
Adjustment
5. The cable should be installed so that when the gas pedal is fully released, there is a slight slack in the cable and the throttle is fully closed. Ask an assistant to depress the pedal all the way and make sure that the throttle valve opens fully, and after releasing the pedal, it returns to its original position.
6. Adjustment is made by moving the clip on the cable housing in the mounting/adjustment bracket.