Caution! During these operations, the surface of the knee airbag may be damaged due to mechanical impact. After completing the inspection, check the surface of the knee airbag for damage.
Tilt the bottom cover "1" forward in the "direction of the arrow".
Disconnect connector "2" from the gas pedal module by pressing the lock upwards. Unscrew screw "1". Remove gas pedal module "3" from the mount.
Installation
Installation in reverse order. On vehicles with DSG automatic transmission, when replacing the gas pedal module, it is necessary to adapt the engine control unit.
The original article can be found on the resource: SKODABOOK