Removing
1. Remove the front driver's airbag module (for details, see the relevant section in chapter Passive safety).
2. Remove steering wheel assembly (for details, see the relevant section in chapter Steering).
3. Release the steering wheel adjuster locking lever.
4. Pull the steering wheel towards you as much as possible and lower it as far as possible.
5. Disconnect the instrument panel lining together with the upper part of the steering column lining panel (1) from the latches, as shown in the figure below.
6. Remove the upper part of the steering column trim panel assembly (1).
7. Unscrew the fastening screws (2) the bottom of the steering column trim panel, as shown in the figure below. Mounting screw tightening torque during installation: 1.5 Nm.
8. Disconnect from the clips and remove the lower part of the steering column trim panel (1), as shown in the figure below.
Installation
Installation is carried out in the reverse order of removal.