Contents: Removal ⬇ Installation ⬇
Removal
1. Detach the rear pillar trim panel (1) from the door seal on the door opening as shown in the figure below.
2. Disconnect the rear pillar trim panel from the tailgate seal at the rear.
3. Disconnect the rear pillar trim panel from the retaining clips (2) as shown in the figure below.
4. Press on the guides of the rear pillar trim panels in the luggage compartment, then remove the trim panel from the luggage compartment.
Installation
Installation is carried out in the reverse order of removal.
Note: Before installing the trim panel, it is necessary to check all fastening elements and, if necessary, replace these elements with new ones.
Note: After installing the trim panel onto the pillar, check and ensure that the trim panel is securely fastened to the rear door and tailgate seals.
