Rear Seat Center Seat Belt — Removal and Installation (Skoda Rapid NH1)

Removal

1. Remove the rear seat cushion assembly (see the relevant section in Chapter Body).

2. Unscrew the mounting bolt (3) shown in the figure below. Tightening torque of the mounting bolt during installation: 40 Nm.

3. Remove the buckle together with the rear seat center belt (1) from the main support surface (2) as shown in the figure below.



4. Remove the rear seat back (see the relevant section in the chapter Body).

5. Remove the rear seat back cover (see the relevant section in Chapter Body).

6. Unscrew the fastening nut and remove the seat belt assembly.

Installation

1. Installation is carried out in the reverse order of removal.

[Text taken from this website: SKODABOOK.RU]