Contents: Removal ⬇ Installation ⬇
Removal
1. Disconnect the negative terminal from the battery.
2. Remove the glove box assembly (see the corresponding section in the chapter Body).
3. Disconnect the wiring harness connector from the passenger front airbag switch (1) as shown in the figure below.
4. Squeeze the clips (2 and 3) and remove the passenger front airbag switch.
Installation
1. Install and secure the front airbag switch.
2. Connect the wiring harness connector to the airbag switch.
3. Install the glove box assembly (see the relevant section in the chapter Body).
4. Connect the negative terminal to the battery.
Caution: There should be no one in the car when connecting the terminal to the battery.