Opening air inlets
Turn the horizontal handwheel (to other than end position).
Closing air inlets
Turn the horizontal handwheel to its end position.
Changing the direction of the air flow
To change the height of the outlet air flow, move the air inlet louvers with the vertical handwheel. To control the flow of exhaust air in the lateral direction, turn the horizontal handwheel on the blower nozzle to the right or left.
The air supply to the individual blower nozzles is adjusted by the setting knob (WITH). It is possible to open and close air inlets 3, 4 and 6 independently.
Blower nozzles 6 are only available on vehicles with a high middle panel.
The open air inlets draw warm or unheated air, depending on the position of the control knob (A) and from outdoor weather conditions.
Note. Air inlets 2 provide comfortable ventilation of the interior of the body in ventilation mode (no draft) even if the air inlets are closed 4.