Defrosting the windshield and side windows
Leave the tuning knob (A) set to your usual temperature (recommended 22°C); the device will automatically adjust the heating to maximum heat output until you reach the desired temperature.
Fan switch (IN) - to position 4.
Air distribution adjustment knob (WITH) — to position .
Open the air inlet nozzles 3 and adjust the direction of air flow to the side window.
Close the air inlets 4.
Keeping the windshield and side windows defogged
If at high relative humidity (e.g. in rainy weather) the windows fog up, it is recommended to make the following settings:
Fan switch (IN) — to position 2.
Air distribution adjustment knob (WITH) - to position ;
Open the air inlet nozzles 3 and adjust the direction of air flow to the side window.
Close the air intake nozzles 4. Turn on the cooling with the button (1).
The fastest heating of the interior of the car
Leave the tuning knob (A) set to your usual temperature (recommended 22°С); the device will automatically adjust the heating to maximum heat output until you reach the desired temperature.
Fan switch (IN) - to position 4.
Air distribution adjustment knob (WITH) - to position .
Open air intake nozzles 3 and 4.
It is recommended to turn on the air recirculation mode for a short time with the button (3) In this position, the windows of the car may fog up.
Achieving a pleasant temperature inside the car
If the glasses do not fog up and the required temperature has already been reached, it is recommended to make the following adjustment;
tuning knob (A) - to the required temperature.
Fan switch (IN) - to position 2 or 3.
Air distribution adjustment knob (WITH) - to position .
Open the air inlets 3.
Close the air inlets 4.
If the windshield fogs up again, move the tuning knob to C as needed, and an intermediate position between and .
The fastest heating of the interior of the car
Close all windows, including the sunroof.
Leave the tuning knob (A) set to your usual temperature (recommended 22°C); the device will automatically adjust the cooling to maximum cooling capacity until you reach the set temperature.
Fan switch (IN) - to position 3 in order to ventilate the interior of the car.
After a short ventilation, set the fan switch (IN) - to position 2 or 4.
Air distribution adjustment knob (WITH) - to position .
Open air intake nozzles 3 and 4.
Turn cooling on with the button (1).
It is recommended to turn on the air recirculation mode for a short time with the button (3).
Ideal cooling mode
tuning knob (A) - to the required temperature. This temperature is maintained automatically.
Fan switch (IN) - in position 1, 2 or 3.
Air distribution adjustment knob (WITH) — to position .
Open air intake nozzles 3 and 4.
Turn cooling on with the button (1)
It is recommended to adjust air intake nozzles 3 and 4 towards the ceiling. Do not turn on air recirculation.
Fresh air mode - ventilation
At the next setting, unheated fresh air comes out of air inlets 2 and 3.
tuning knob (A) - all the way.
Fan switch (IN) - to the required position.
Air distribution adjustment knob (WITH) — to position .
Open air intake nozzles 3 and 4.
Turn off cooling with the button (1).
Turn off recirculation with the button (3).
As required, it is possible to translate the rotary knob (WITH) also in a different position.