Temperature control
If you wish to increase the temperature, turn the setting knob.
If you wish to lower the temperature, turn the setting knob (A) to the left.
Ventilation regulation
If you want to turn on the fan, turn the switch (IN) in one of positions 1-4.
If you want to turn off the fan, turn the switch (IN) into position "0".
Turning cooling on and off
Press the [AC] button (2). The indicator in the button lights up.
Pressing the [AC] button again will turn off the cooling. The indicator in the button goes out.
Rear window heating
The right extreme position is the maximum heating.
Left extreme position - maximum cooling.
Keep the fan on at all times to prevent the windows from fogging up.
If you want to shut off the fresh air supply, use the button (1) — air recirculation.
Air distribution control
The air supply to the individual blower nozzles is adjusted by the setting knob (WITH).
Note.
- In the case of setting the air supply to the glass, the full heat output is used
- to defrost the windshield. In this case, no air is supplied to the floor area. This can lead to a deterioration in heating comfort.
- Ventilation of the interior space of the car is provided through the holes located in the rear section of the trunk of the car.
- If the refrigeration has not been switched on for a relatively long time, an odor may occur due to deposits on the evaporator. To prevent this smell, turn on the cooling system - even during the cold season - at least once a month for about 5 minutes. at the highest level of ventilation. At the same time, open the window for a short time.
- Observe the instructions for air recirculation.