Defrosting the windshield and side windows
tuning knob (A) - all the way to the right.
Fan switch (IN) - to position 3.
Air distribution adjustment knob (WITH) — to position .
Open the air inlet nozzles 3 and adjust the direction of air flow to the side window.
Close the air inlets 4.
Keeping the windshield and side windows defogged
If at high relative humidity (e.g. in rainy weather) the windows fog up, it is recommended to make the following settings:
tuning knob (A), if necessary - in the heating strip.
Fan switch (V) - to position 2 or 3.
tuning knob (WITH), if necessary - to the position , or to any intermediate position between these characters.
Open the air inlet nozzles 3 and adjust the direction of air flow to the side window.
Close the air inlets 4.
The fastest heating of the interior of the car
tuning knob (A) - all the way to the right.
Fan switch (IN) - to position 3.
Air distribution adjustment knob (WITH) - in position.
Open air intake nozzles 3 and 4.
It is recommended to turn on the air recirculation mode for a short time with the button (1). In this position, the windows of the car may fog up.
Achieving a pleasant temperature inside the car
If the windows do not fog up and the required temperature has already been reached, it is recommended to make the following settings:
tuning knob (A) - for the required heat output.
Fan switch (IN) - to position 2 or 3.
Air distribution adjustment knob (WITH) - to position .
Open the air inlets 3.
Close the air inlets 4.
If the windshield fogs up again, turn the setting knob (C), if necessary, to an intermediate position between and .
Fresh air mode - ventilation
At the next setting, unheated fresh air comes out of the air inlets 3 and 4.
Air recirculation must not be turned on.
tuning knob (A) - all the way to the left.
Fan switch (IN) − to the required position.
Air distribution adjustment knob (WITH) - to position .
Open air intake nozzles 3 and 4.
The rotary knob can be moved as needed (WITH) also in a different position.