Right and left turn signal
Move lever up A or down B.
To flash the turn signal three times (the so-called comfort turn signal), briefly move the lever up or down to the point of resistance and release.
Lane Change Warning - For a short turn signal, move the lever up or down to the point of resistance and hold it in that position.
High beam
Turn on the low beam.
Push the switch forward in arrow C.
To turn off the high beam, return the switch to its original position in the direction of arrow D.
Light signal («flashing distant»)
Pull the lever towards the steering wheel (spring loaded position) in the direction of arrow D.
Attention. Use high beams and a light signal only if this does not lead to dazzling other road users.
Note.
- The direction indicators only work when the ignition is on. The corresponding indicator lamp also flashes (left arrow) or (right arrow) in the instrument cluster.
- After the turn is completed, the direction indicators turn off automatically.
- If one of the turn signal bulbs on the vehicle burns out, the warning light will flash twice as fast.