Removing
1. Remove the lower protective casing of the engine compartment.
2. Disconnect the wiring harness connector (arrow), shown in the figure below.
3. Disconnect the coolant hose clamps (1) on the fan cover (2), as shown in the figure below.
4. Unlock the upper right fastener of the fan shroud and detach the shroud from the fasteners.
5. Remove the fan shroud downwards.
6. Remove electrical wires (1) cable ties as shown in the figure below.
7. Unscrew the fastening nuts (arrows), remove the additional cooling fan -V7- as shown in the figure below.
Installation
Installation is carried out in the reverse order of removal.