11.1 Outside rear view mirror assembly parts
1, 5 Soundproofing
2 Mirror Assembly
3 Mirror glass
4 Wiring connector
6 Bolt, 9 Nm
7 Inner lining
8 Retainer
2. Tilt the reflective element (2 to resist. illustrations) until it stops, use a screwdriver to release its holders along the perimeter in the direction of the arrow and squeeze out the reflective element.
11.2 Removing the reflective element
3. Turn out bolts (1 and 3 on resist. illustrations), unhook the case with a screwdriver (2) in the places indicated by the arrows, and remove the housing upwards (dotted arrows).
11.3 Removing the exterior mirror housing
4. Installation is carried out in the reverse order.