Upholstery and rugs — care Rugs should be brushed or vacuumed regularly to keep gravel and sand from accumulating. If the mats are heavily soiled, remove them, clean or sponge and reinstall, making sure they are dry. Seats and interior trim...
External body components — removal and installation Removing Mudguards 1. Mudguards are attached with bolts and union nuts. Loosen the bolts and remove the splash guards. Roof gutter 2. The gutter molding is attached to the roof with brackets and can be removed with a...
Seats — removal and installation Removing Front seat 1. Use the adjuster to move the seat all the way back, then remove the front fixing screw (photo). 2. Move the seat all the way forward and remove the rear fixing screw (photo). 3. Remove the seat....
Seat belts — removal and installation Warning: If the seat belts have been stressed in an accident, they must be replaced. When removing the clips and fasteners of the belt, note the sequence of installation of the spacers, washers, etc., and install them...
Interior decoration — general description Interior finishing panels 1. Interior trim panels are attached with screws or various studs or countersunk fasteners. 2. To remove the panel, carefully inspect it and note how it is attached; there may usually be some...
Glove box — removal and installation Removing 1. Open the glove compartment lid, and remove the support post by removing the pivot pin (photo). 2. Unscrew the two screws, and remove the cover from the glove compartment (photo). 3. Remove the screws...
Instrument panel — removal and installation Pic. 11.7. Panel and its components 1. Panel; 2. Heating/ventilation channels; 3. Side plate; 4. Air duct; 5. Ashtray; 6. Opening for car radio; 7. Bracket for fastening the instrument panel to the panel; 8. Upper...