2. Loosen the bolts (1) - (4) securing the front suspension subframe to the vehicle body.
3. By moving the front suspension subframe (5), adjust the camber angles of the front wheels.
Please note: In this case, the subframe may only be moved left or right; longitudinal movement of the subframe is prohibited.
4. Loosen the fastening nut (1) and remove the floor covering in the direction of the arrow, as shown in the figure below.
The original can be viewed on [SKODABOOK.ru]
5. Inspect and check that the gap between the universal joint of the steering column shaft (1) and the body cross member is 5 mm.
