Power window device
1. Remove door molding.
2. Remove the sound absorbing and sealing film.
3. Lower or raise the glass so that the glass clamps
4. After loosening the hex nuts 1, move the clamping jaws apart.
5. Pulling the door glass up, fix it (e.g. adhesive tape).
6. Loosen the screws 2 of the power window device (10 Nm).
7. Unhook the Bowden cable from the fixed position.
8. In the case of an electrically operated window regulator, the plug connection must be disconnected.
9. Raise the power window so as to pull out the screws 2 through the mounting holes.
10. Remove the power window through the mounting hole down.