Warning! The shock absorber may only be clamped at the specified distance, otherwise there is a risk of injury!
Attention! Use safety glasses when cutting.
Attention! During cutting, cover the cut area with a cloth.
Caution! Dispose of oil and oily rags in accordance with current environmental protection regulations.
1. Clamp the gas-filled shock absorber in a vice at a distance of x = 50 mm.
2. Cut the cylinder of the gas-filled shock absorber in the first third of its length (measured from the edge of the cylinder to the width of the rod).
[Article published on the website: SKODABOOK.RU]