Rear combined light (assembly scan)
1 – flashlight body; 2 – rear fog light bulb (12 V, R 21 W); 3 – side light lamp (12V, R 5W); 4 – fastening nuts; 5 – body; 6 – lamp holder; 7 – direction indicator lamp (12 V, R 21 W); 8 – brake light (12 V, R 21 W); 9 – Reversing light bulb (12 V, R 21 W)
The rear combined light is formed by a black plastic housing welded to the outer cover. It is made of organic glass of different colors. The light is centered with two plastic pins and screwed with four M5 nuts to the rear side. There is a rubber seal between the body and the light. On the rear side of the lamp, a holder with lamps and a metal stamping, replacing the wire, is mounted on three elastic pistons. The metal stamping is attached with fused plastic brackets. The lamp holder covers the light and at the same time carries a six-pin connector for connecting to the car's electrical wiring.
The body of the lamp is divided by partitions into five parts and the upper cover has five belts of different colors and reliefs corresponding to individual lamps. The rear turn signal is located in the upper part - a pink belt. Under it is a brake light (red belt). In the middle part there is a transparent belt, under which there is a reversing light. Then there is a rear side light, the red cover of which has a relief that simultaneously functions as a reflector. At the very bottom, under the red belt, there is a rear fog light.
Material is available on the website [www.skodabook.ru]