Remove the front door trim. Remove the door cover. Remove the lock cylinder or cover. Remove the outer door handle. Unscrew screw "4" and remove gasket "3". Remove handle housing "1" from door "arrow a".
Disconnecting the drive cable
Unlock the holder "5" and move the holder out of the mount in the support bracket - see arrow b-. Remove the drive cable pin from the mount "arrow c". Remove the cable "2" from the support bracket (pos. 1) -arrow d-.
Installation
Installation in reverse order. Screw in screw "2", tightening torque: 1.5 Nm.
This material is published on the portal [SKODABOOK.RU]