Remove front door trim. Remove the inner sealing strip of the door cavity. Pry off and remove plug -4-. Remove trim -5-. Lower glass -1- until locks -2- on guide wheels -3- are visible in holes. Clicking (e.g. a screwdriver) on the latch in the place indicated by -arrow-, unlock the door glass -2-. Repeat the same for the second fixer.
Note: If this operation is not possible due to a defective power window, the motor must be removed (depending on vehicle configuration). Then the door glass can be moved to the desired height.
Raise door glass -1- at rear and turn forwards -arrow- to remove it from guide -2-.
Installation
Insert door glass -1- in direction -arrow a- into guide -2-.
Note: Make sure that the glass fits correctly in the guide.
Slide window into clips -arrow b- without force. Align the window pane with the window frame - see arrow c-. With light pressure, press the glass evenly on both sides into the latches until it clicks. Further actions are performed in the reverse order of removal. Before installing the door trim, check the function.