1. Screw: 3 Nm
2. Left side guide profile
3. Right middle guide profile
4. Nuts: 2.2 Nm
5. Left middle guide profile
6. Screw: 55 Nm
7. Towing hitch. Removal: Remove the bumper. Partially remove the heat-insulating casing above the exhaust pipe. Remove the connector socket (item 9). Unscrew the screws (item 6). Pull the towing hitch out of the vehicle from the rear. Install in the reverse order.
8. Clamp. Removal: Open the lock on the drive lever. Fold the drive lever 90°. Remove the clamp. Install in reverse order.
9. Socket. Removal: Remove the screws. Remove the socket housing. Disconnect the wires. Installation in reverse order. Use the socket type and electrical installation material in accordance with the regulations of the specific country.
Parts and components of the towing hitch (Combi)
1. Screw: 3 Nm
2. Left side guide profile
3. Right middle guide profile
4. Nut: 2.2 Nm
5. Left middle guide profile
6. Screw: 55 Nm
7. Towing hitch. Removal: Remove the bumper. Partially remove the heat-insulating casing above the exhaust pipe. Remove the connector socket (item 9). Unscrew the screws (item 6). Pull the towing hitch out of the vehicle from the rear. Install in the reverse order.
8. Clamp. Removal: Open the lock on the drive lever. Fold the drive lever 90°. Remove the clamp. Install in reverse order.
9. Socket. Removal: Remove the screws. Remove the socket housing. Disconnect the wires. Installation is in the reverse order. Use the socket type and electrical installation material in accordance with the regulations of the specific country.