Drawbar Parts
1 - traction coupling device; 2 - bolts; 3 - protective cap; 4 - hook with a ball head; 5 - plug; 6 - screw; 7 - washers; 8 - socket; 9 - sealant; 10 - outlet bracket
1. Remove hook 4 (see fig. Drawbar Parts) towing device in accordance with the instructions attached to it and replace it with plug 5.
2. Remove the rear buffer.
3. Unscrew the three fastening screws 6 and remove the socket 8, disconnecting the wires from it.
4. Remove the wiring harness from the bracket 10 on the trailer hitch.
5. Turn away four bolts 2 and remove the traction coupling device 1 from the car.
6. Install the trailer hitch in reverse order.
Tightening torques, Nm
Bolt of fastening of the traction hitch | 70 |
Socket fixing screw | 2,5 |