Removal and installation of an internal rear-view mirror
Turn interior rear view mirror -2- by 90°in direction of -arrow- and remove from retaining plate -1-.
Installation in reverse order.
Removal and installation of an internal rear-view mirror with the sensor of a rain
Turn the mirror all the way down, approximately 25°.
Unclip rear cover -2- in -arrow- downwards and at the same time unlock catch -1- with a screwdriver. Unhook and remove the back cover. Carefully unhook retainers -arrows- and slide front cover -1- downwards out of guides on retaining plate for interior mirror -2-.
Turn interior mirror -1- 40°counterclockwise -arrow- and remove downwards.
Disconnect the connector from the interior mirror, if any.
Installation in reverse order.
Removing and installing interior mirror with rain sensor and camera
1. Interior rearview mirror
2. Camera cover
3. Interior rear view mirror mounting cover
Insert tool -T30098- -2- into slot between covers and press lock -A-.
Unclip cover -1- towards bottom in -arrow B-. Insert the tool -T30098- -1- into the gap between the covers on the other side and press the catch.
Remove trim -2-. Pull the chamber cover -1- out of the retaining plate in the direction of -arrow A- and remove it in the direction of -arrow B-.
Using open end wrench -3- turn interior mirror -2- anti-clockwise by 20°C -arrow- and remove downwards.
Disconnect the connector from the interior mirror.
Installation in reverse order.