Unlock the fasteners on the edges of the door. Unlock the fasteners on the top edge of the door. Remove lining.
Installation
Insert cover at brake light frame -3-. Fix the frame at the top edge of the door. Insert the tailgate trim under the ends of the rear window frame trim. Fix the rear window trim along the edges.
Note: Before installation, check all fastening elements for damage and replace if necessary.
Removal and installation of facing of back glass (Combi)
Remove tailgate trim. Release plastic caps -3- and remove them. Unlock catches at door edges -1-. Unlock catches at upper edge of door -1-. Remove trim -2-.
Installation
Fix the frame at the top edge of the door. Fix the rear window trim along the edges. Secure with plastic clips -3-.
Note: Before installation, check all fastening elements for damage and replace if necessary.
Removal and installation of an overlay of a loading edge of a luggage compartment
Remove screw -3-. Partially detach the tailgate seal in the area of the tailgate trim. Detach luggage compartment loading lip -1- from carrier panel towards top, unlocking catches.
Installation
Installation in reverse order.
Note: Before installation, check all fastening elements for damage and replace if necessary.
Make sure that the luggage compartment loading lip trim is in the boot lid seal bezel after installation.
Removal and installation of an overlay of a loading edge of a luggage compartment (Combi)
Release plastic caps -3- and remove them. Remove screws -4- (2.5 Nm). Detach luggage compartment loading lip -1- from carrier panel towards top, unlocking catches -2-.
Installation
Installation in reverse order.
Note: Before installation, check all fastening elements for damage and replace if necessary.
Make sure that the luggage compartment loading lip trim is in the boot lid seal bezel after installation.