Removal and installation the side trim of the luggage compartment (Skoda Octavia 5E)

Contents: Removal and installation the upper…⬇ Removal and installation the side…⬇ Removal and installation the side…⬇

Removal and installation the upper part of the side trim of the luggage compartment

1. Upper part of the side trim of the trunk. Removal: Remove the wheel arch trim. Remove the C-pillar trim. Unscrew screw "1". Disconnect the trim from the fasteners on the body. Installation in reverse order.

2. Spacer insert

3. Screw: Tightening torque - 2.5 Nm.

Removal and installation the side trim of the luggage compartment

Note: The design of the side trim depends on the vehicle equipment.

Remove the trunk trim. Remove the luggage compartment loading edge trim. Remove the seat. Remove the seat back. Remove the rear side airbag and, if necessary, the seat side panel (depending on the vehicle configuration). Remove the upper part of the side trim of the trunk. Unscrew the screws "4" (1.2 Nm) of the clamps "3". Unscrew the screws "5" (2.5 Nm) of the hook for bags "6" (only on the left side). Partially detach the luggage compartment door seal in the area of the luggage compartment trim. Move the trim slightly. Disconnect the luggage compartment light connector. Disconnect the socket connector (only on the left side). Remove trim "1" from the luggage compartment.

Installation in reverse order.

Removal and installation the side trim of the luggage compartment (Combi)

Note: The design of the side trim depends on the vehicle equipment.

Remove the roller blind from the trunk. Remove the storage compartment (only on the right side). Release the trunk lining from the subwoofer (depending on the vehicle configuration). Remove the luggage compartment loading edge trim. Remove the seat. Remove the backrest. Remove the rear side airbag and, if necessary, the seat side panel (depending on the vehicle configuration). Loosen screws "7" (2.5 Nm) of clamps "6". Loosen screws "1" (7 Nm) of bag hooks "3". Unlock plastic pin "5" and remove. Unlock plastic pin "8" and remove. Loosen screws "4" (2.5 Nm). Partially detach the tailgate seal in the area of the tailgate trim. Slightly move the trim. Disconnect the tailgate light connector. Disconnect the electrical outlet connector. Remove trim "2" from the tailgate.