First, detach the top part "1".
Then detach the lower part "1" and pull it out of the eye "2".
 |
 |
Grasp the rear seat "1" from below with both hands in the area of the left and right fastening inserts "2" and lift the seat with a strong jerk in the direction of the "arrow".
Installation
Before installing the seat, replace the fastening inserts "2" as they are disposable.
Install the seat in the "direction of the arrow" so that the hooks "1" on both sides are fixed in the fastening inserts "2" with a noticeable click.
Install the ISOFIX child seat anchorage pads.
Note: After installation, check that the seat is securely fastened.
 |
 |
Removal and installation the rear seat
Remove the rear seat to gain access to screw "1". Unlock and fold the backrest parts. Remove the clamp cover. Unscrew screw "1" (9 Nm) and remove clamp "3" from fastening "2".
Disconnect the backrest from the central supports "see arrow A". Slide out the rear seat back using the arrow B fingers.
 |
 |
Cars with heated rear seats
Disconnect the seat heating connector.
Installation in reverse order.