Seat without height adjustment
Remove the front seat. Remove screw -1- (1 Nm). Press adjustment -5- of seatback adjustment lever -4-. Remove seat back adjustment lever -4-.
Note: The backrest adjustment lever -4- is usually damaged when removed.
Open the locking tab of the seat trim -2- from below and press the fastening from the bracket. Detach seat trim -2- from seat frame -1- and remove.
Installation
Installation in reverse order.
Note: Before installation, check all fastening elements for damage and replace if necessary.
Height adjustable seat
Remove the front seat. Remove screw -1- (1 Nm). Press off trim -5- on seatback adjustment lever -6-. Remove seat back adjustment lever -6-.
Note: The backrest adjustment lever -6- is usually damaged when removed.
Pull the handle -2- up and press the metal tab of the clip -3- inwards with a thin screwdriver. Remove knob from adjustment lever -4-.
Note: For better clarity, the clamp is shown in the figure in the dismantled position.
Remove clamp -2- from adjustment lever -3-.
Open the locking tab of the seat trim -2- from below and press the fastening from the bracket. Detach seat trim -2- from seat frame -1- and remove.
Installation
Installation in reverse order.
Note: Before installation, check all fastening elements for damage and replace if necessary.