Removal and installation of the seat height adjustment lever
Remove the front seat. Remove seat trim from door sill (height adjustable seat). Remove screws -1- (4.5 Nm) and remove lever -2-.
Installation in reverse order.
Removal and installation of the handle of adjustment of height of a seat
Note: For better clarity, the clamp is shown in the figure in the dismantled position.
Pull the lever -1- upwards and push the metal tab of the clip -2- inwards with a thin screwdriver. Remove knob from adjustment lever -3-. Remove clamp -2- from adjustment lever -3-.
Installation
Note: Before installation, check clip -2- for damage and replace if necessary.
Installation in reverse order.
Removal and installation of the lever for adjusting the position of the lumbar support
Remove lever for adjusting lumbar support -1- from shaft splines -2-.
Installation
Place the lumbar support adjustment lever on the shaft splines and lock.
Note: Make sure that the shaft splines match the splines on the lumbar support adjustment lever.