Contents: Installation ⬇ Tightening torques ⬇
The sensor does not require mechanical adjustment.
Note: For clarity, the illustration shows the suspension removed.
Disconnect connector "1" from the left front ground clearance sensor of the vehicle.
Unscrew nut "1" from the lever (different designs). Remove bracket "2" for ride height sensor "3".
Unscrew bolt "1" securing to the subframe and remove the sensor.
Installation
Installation in reverse order. After installation: Perform basic installation of the headlight corrector.
(Information copied from the resource: SKODABOOK.RU)
Tightening torques
