Removal and installation the oil pressure sensor «F1» (Skoda Octavia 5E)

Remove the upper engine casing. Unscrew bolts -1, 3-. Unlock the lock "arrow" and remove the cover "2".



Release coolant hose "2". Unlock the clamps "arrows", remove the upper part of the air duct "1".



Unscrew the screw "arrow" on the left and right. Unhook and remove the lower part "1" of the air duct.



Disconnect the electrical connector "arrow".



Unscrew the oil pressure sensor "F1".

Installation

Installation in reverse order.

Note: Replace the sealing ring. Check the oil level.