Removal and installation the oil level and temperature sensor «G266» (Skoda Octavia 5E)

Drain the engine oil. Disconnect the electrical connector "arrow" from the oil level and temperature sensor "G266".



Loosen the fastener "arrow" and remove the sound insulation "1" of the oil pan.



Unscrew screws "1" and remove the oil level and temperature sensor "G266" "pos. 4". -Position 3- ignore.

Installation

Installation in reverse order.

Note: Replace sealing ring "2" and self-locking screws.

Fill the engine with oil and check its level.

[Material published on the website skodabook.ru]