Carefully! Risk of destruction of an already used V-ribbed belt when it is installed in the opposite direction. If the replacement of the V-ribbed belt is not planned, then before removing it, the direction of the belt should be marked with chalk or a felt-tip pen.
To loosen the V-ribbed belt, use the spanner to turn the tensioner counterclockwise -arrow-. Lock tensioners with locking pin -T10060 A-. Remove poly V-belt.
Installation
Installation in reverse order. Install poly V-belt on pulleys.
1. Crankshaft pulley
2. Tension roller
3. Generator
4. Air conditioning compressor
Use a wrench to hold tensioner and remove lock -T10060 A-. Release the tensioner, Check that the V-ribbed belt is correctly retracted. Start the engine and check the movement of the V-ribbed belt.