Note.
- Necessary devices, special control and measuring instruments, as well as auxiliary means:
- Socket wrench "T30032".
1. Remove the poly V-belt and, if necessary, the alternator.
2. Using a socket wrench (T30032), remove the poly V-belt pulley. Turn the alternator shaft to the right.
3. Installation - turn the alternator shaft to the left. Tightening torque: 65 Nm.
Removal and installation a poly V-belt pulley with a freewheel clutch
Note.
- Necessary special devices, control and measuring instruments, as well as auxiliary means.
- Multi-tooth attachment for removing and installing alternator pulley -MP 1-309-.
1. Remove the poly V-belt and, if necessary, the alternator.
2. Remove the poly V-belt pulley using the multi-tooth alternator pulley remover and installer -MP 1-309-. Turn the alternator shaft to the right.
3. When installing, turn the alternator shaft to the left. Tightening torque: 80 Nm.
(Data taken from an online portal www.skodabook.ru)
4. Place the cuff on the alternator pulley with the freewheel clutch.
