Loosen clamp -arrow- and remove air hose -1- from intercooler.
Unscrew left and right screws -arrow-. Detach bottom part of air duct -1- from mountings and remove.
Raise retaining clip -1-, remove coolant connection and press to one side.
Disconnect connectors -2, 3 and 4-, unscrew screws -1- and place bracket aside.
Disconnect connector -1- from oil pressure switch stage 3-F447- -2-. Remove screws -arrows- and remove toothed belt guard.
Remove screws -1...4- and remove toothed belt from coolant pump. Remove screws -1...4- and remove coolant pump from thermostatic actuator -N493-.
Installation
Installation in reverse order. Install coolant pump, ensure correct seating -arrows-. At the same time, check that the seal -3- is in the correct position.
When installing a new coolant pump, remove protective cap -arrow-. Fill up the coolant.