Removing
1. Remove the audio speaker.
2. Unscrew the fastening screw (2) front body pillar.
3. Unscrew the fastening screws (3) and remove the front door travel stop through the hole for the audio speaker, as shown in the figure below.
Installation
1. Pull the front door travel stop through the speaker hole.
2. Install fixing screws (3) and tighten them with a tightening torque of 9 Nm as shown in the figure below.
3. Install the fixing screw (2) and tighten it with a tightening torque of 30 Nm.
4. Install the speaker of the audio system.