Removing
Note. When removing the lock cylinder cover, do not turn the screwdriver and lever together with it.
1. Remove the door handle.
2. Insert a flathead screwdriver into the hole at the bottom of the cover (3) and push it in the direction of the arrow «A», as shown in the figure below.
3. Carefully detach from the clips at the bottom and move in the direction of the arrow «b» together with a screwdriver cover the lock cylinder (1), as shown in the figure below.
4. Remove the cover from the lock cylinder.
Installation
1. Pull the door handle assembly (1).
2. Install the lock cylinder cover by moving it from top to bottom at a slight angle in the direction of the arrow «A», as shown in the figure below.
3. Press on the bottom of the cylinder cover (2), to finally fix it in the clamps, as shown in the figure below.