Lubrication system components of the 1.2 l TSI engine in assembly (Skoda Rapid NH1)

1. Oil filler cap
2. Pressure line of the lubrication system
3. Oil dipstick
4. Mounting bracket for attachments (upper) (with oil filter and oil cooler)
5. Gasket
6. Guide bushing
7. Oil filter assembly, tightening torque during installation 20 Nm
8. Fastening bolt, tightening torque during installation 25 Nm
9. Gasket
10. Fastening bolt, tightening torque during installation 8 Nm - tighten by 90°
11. Engine oil cooler
12. Fastening bolt, tightening torque during installation 8 Nm
13. Upper part of the timing chain cover
14. Fastening bolt, tightening torque during installation 25 Nm
15. Lower part of the timing chain cover
16. Fastening bolt (M6x20), tightening torque during installation 5 Nm + tighten by an additional 30°
17. Fastening bolt (M6x40), tightening torque during installation 5 Nm + tighten by an additional 30°
18. Oil pump drive chain
19. Crankshaft pulley mounting bolt
20. Crankshaft pulley
21. Diamond coated washer
22. Sealing ring
23. Bottom cover
24. Fastening bolt, tightening torque 20 Nm + further tighten by 90°
25. Oil pump drive sprocket
26. Oil pump
27. Oil pan mounting screw, tightening torque during installation 13 Nm
28. Fastening screw, tightening torque during installation 10 Nm
29. Engine oil level and temperature sensor
30. Sealing ring
31. Drain plug, tightening torque of the plug during installation 30 Nm
32. Oil pan
33. Fastening bolt, tightening torque during installation 14 Nm + further tighten by 90°
34. Sealing ring
35. Suction line of the lubrication system
36. Fastening screw, tightening torque during installation 8 Nm
37. Fastening screw, tightening torque during installation 8 Nm
38. Oil separator
39. One-way valve