1. Door
2. Allen screw: 40 Nm
3. Door hinge: the hinge is detachable; the upper part of the hinge is connected to the lower one with a screw -4-
4. Screw: To remove the door, this screw must be removed from the door hinge; 23 Nm
5. Screw with an internal polyhedron: installed from the passenger compartment. Remove the A-pillar lower trim; 25 Nm.
6. Door hinge: the hinge is detachable; the lower part of the hinge is connected to the upper one with a screw -4-
7. Allen screw: 25 Nm.
8. Screw: 30 Nm; to remove the door, this screw must be unscrewed
9. Door opening limiter
10. Screw: 9 Nm.
11. Screw with an internal polyhedron: installed from the passenger compartment. To loosen or tighten the screw on the driver's side, remove the instrument panel. To loosen or tighten the screw on the front passenger side, remove the instrument panel; 25 Nm.
12. Door hinge: the lower part of the hinge is connected to the upper part with a screw -16-; the loop is detachable
13. Screw with an internal polyhedron: 25 Nm.
14. Screw with internal polyhedron: 40 Nm
15. Door hinge: the upper part of the hinge is connected to the lower part with a screw -12-; the hinge is detachable
16. Screw: 23 Nm; to remove the door, this screw must be unscrewed from the hinge axis
Insert wedge -T10383/1- between seal -3- and retainer -2-, -arrow a-. Raise lock -2- with wedge -T10383/1- upwards -arrow b- and unplug connector. Loosen the screws -7- -arrow e- on the hinges. Remove screws -4- for door stop -5-. Move door stop -G- inward in -arrow d-. Remove door -1- in -arrow f- from hinges.
Installation
Installation in reverse order. Screw tightening torque (pos. 7); 23 Nm. Screw tightening torque (pos. 4): 30 Nm. Set the gaps around the perimeter of the front door.