Installing front door seals
1 – lower door seal; 2 – piston; 3 – opening seal; A – 300 mm
1. To replace the lower seal 1 (see figure Installing front door seals) doors, remove the pins 2 from the door panel and remove the seal 1.
2. Install the new seal in reverse order.
Text taken from this website: skodabook.ru
3. To replace the door opening seal 3, remove the corresponding trim and then the seal.
4. Start installing the new seal from the top of the opening. In this case, the joint of the seal must be located on the front body pillar at a distance of A = 300 mm from the threshold.