 |
 |
1. Hood
2. Support shock absorber: Height is adjusted by rotation.
3. Hood seal
4. Lock bracket
5. Soundproofing. Removal: Disconnect all soundproofing clips one by one. Remove the soundproofing from the hood. Install in the reverse order.
6. Fixer: For fixing noise insulation.
7. Plugs
8. Loop
9. Activator
10. Support bar
11. Hood lock
12. Screw: Tightening torque; 20 Nm
13. Screw: Tightening torque: 20 Nm
Loosen screws "3" of hinges "2" on the left and right (do not turn inside out). Continue dismantling only with the participation of a second mechanic. Disconnect the support rod "4" from the hood. Only now unscrew the screws "3" and remove the hood "1" from the hinges "2".
Installation
Installation in reverse order. Adjust the position of the hood "1".