1. To open the hood, pull the handle 1 of the hood lock drive under the instrument panel 2 on the left side. In this case, the lock will open, but the hood will still be held by the safety hook.
2. Pull lever 1 of the safety hook located slightly to the left of the middle of the front of the hood towards you. Raise the hood with your other hand 2.
3. Remove the stop 2 from the holder on the body and fix the hood 1 in the open position by inserting the end of the stop into the special hole A.
4. To close the hood, lift it up, take out stop 2 and fix it in the holder. From a height of approximately 30 cm, release the hood so that its lock clicks into place.
Attention! When closing the hood, make sure that there are no tools, rags, etc. on the wing flanges or the front cross member.