Removal and installation of the left and right air ducts to the rear passenger footwell
Note: The removal of the air ducts on both sides is carried out in the same way.
Remove the driver's seat or front passenger's seat. Remove center console. Remove the floor covering fasteners from the front. Raise the floor covering, disconnect the air duct from the cross member and disconnect it from the heater.
Installation
Installation in reverse order.
Note: When installing the air duct, it must first be connected to the heater module -arrow- and then attached to the cross member.
Removal and installation of the front air duct under the center console
Remove center console.
Note: If the vehicle does not have a central rear vent, a plug -1- is fitted to the vent in the air conditioner module. The plug is removed by moving in the direction of -arrow A-.
Tilt air duct -2- upwards -arrow B-, detach from heater/air conditioning unit -arrow C- and remove.
Installation in reverse order.
Removal and installation of an air duct of space for the driver's feet
Remove the leg airbag. Remove screw -1- (1.5 Nm) and remove deflector -2-.
Installation in reverse order.
Removal and installation of an air duct of space for legs of the forward passenger
Remove screw -2- and remove shield -1-. Remove storage box.
Remove screw -2- (1.5 Nm), in the presence of. Press out the piston -4- -arrow-, detach the deflector and pull it downwards.
Installation in reverse order.
Removal and installation of the air duct spacer to the windshield deflectors and to the central deflectors
Remove front panel. Remove spacer clips -arrows- and remove spacers -1- and -2-.
Installation in reverse order.