Shock absorber strut — design description (Skoda Octavia 5E)

1. Shock absorber: can be replaced separately

2. Buffer

3. Protective case

4. Spring: There should be no damage on the surface of the spring

(The original can be viewed on: skodabook)

5. Thrust ball bearing

6. Shock absorber support: install in the proper position

7. Nut, 60 Nm: self-locking.; replace after each removal

8. Shock absorber cup

9. Bolt, 15 Nm, then turn 90° further: replace after each removal

10. Protective cap