1. Nut: Replace after each removal; always tighten threaded connections at the vehicle's own weight
2. Washer
3. Upper wishbone
4. Bolt, 130 Nm and turn 180° further: always tighten threaded connections at the vehicle's own weight; replace after each removal
5. Wheel hub bearing housing
6. Bolt, 70 Nm and turn 180°: replace after each removal; always tighten threaded connections at the vehicle's own weight
7. Nut: Replace after each removal
8. Expansion piston
9. Rock guard
10. Screw, 8 Nm
11. Lower wishbone
12. Eccentric screw; after unscrewing, check the wheel alignment angles; do not turn more than 90° to the right or left (i.e. minimum and maximum adjustment)
13. Eccentric washer: inner hole with protrusion
14. Nut, 95 Nm; self-locking; replace after each removal; always tighten threaded connections at the vehicle's own weight
15. Subframe
16. Eccentric screw: after unscrewing, check the wheel alignment angles; do not turn more than 90° to the right or left (i.e. minimum and maximum adjustment)
17. Eccentric washer: inner hole with protrusion
18. Nut, 95 Nm: self-locking; replace after each removal; always tighten threaded connections at the vehicle's own weight
Tightening torques
