1. Washer
2. Nut: Replace after each removal; always tighten threaded connections at the vehicle's own weight
3. Upper wishbone
4. Washer
5. Bolt, 130 Nm and turn 180° further: always tighten threaded connections at the vehicle's own weight; replace after each removal
6. Wheel hub bearing housing
7. Nut: Replace after each removal
8. Expansion piston
9. Bolt, 70 Nm and turn 180°: replace after each removal; always tighten threaded connections at the vehicle's own weight
10. Lower wishbone
11. Rock guard
12. Screw, 8 Nm
13. Subframe
14. Eccentric screw: after unscrewing, check the wheel alignment angles; do not turn more than 90 degrees to the right or left (i.e. minimum and maximum adjustment)
15. Nut, 95 Nm: self-locking; replace after each removal; always tighten threaded connections at the vehicle's own weight
16. Eccentric washer: inner hole with protrusion
17. Eccentric screw: after unscrewing, check the wheel alignment angles; do not turn more than 90° to the right or left (i.e. minimum and maximum adjustment)
18. Eccentric washer: inner hole with protrusion
19. Nut, 95 Nm: self-locking; replace after each removal; always tighten threaded connections at the vehicle's own weight
Tightening torques
