Glove box — removal and installation (Skoda Kodiaq NS7)

1. Unscrew the mounting screws (2) (1.5 Nm) shown in the figure below.

2. Disconnect the glove box (3) from the instrument panel.

3. Disconnect the upper glove box.

4. Disconnect the cooled air supply hose to the print box.

5. Fold back the glove compartment.

6. Cut the wiring harnesses from the instrument panel support cross member.

7. Remove the infotainment module.

8. Disconnect the wiring harness connector from the glove box light.

Data copied from the portal: SkodaBook

9. Disconnect the remaining wiring harness connectors.

10. Remove the glove box assembly.



11. Installation is carried out in the reverse order of removal.